Elite Series pro Shaw Grigsby is well renowned for using topwater frogs for bass fishing. Although it may be tempting to chunk a frog into heavy vegetation, he suggests targeting riprap for some heart stopping topwater action.
Why choose a topwater frog?
It’s no secret that bass love to hang out around riprap banks—especially throughout the fall months. As the submerged rocks grow algae, millions of shad will feed on them for nutrients. Of course, wherever the shad are, the bass won’t be far behind.
When shallow riprap bass are pressured, Grigsby uses a Strike King KVD Sexy Frog to fool the big ones.
“Riprap banks offer an outstanding food source for bass,” Grigsby said. “Not only does the algae growth attract shad, but bluegills are also big suckers for rocky banks. Bass are also attracted to riprap due to the warmth it retains. As the weather gets cooler in the autumn months, big bass will come from all around to soak up the warmth to stay comfortable and active.”
Grigsby understands the effectiveness of hard reaction baits in these areas, but he keeps a frog nearby for two primary reasons.
- Fewer limitations—“To get the best results from hard reaction baits, it’s best to bang them against cover,” Grigsby said. “You can slam a crankbait into the rocks and catch fish, but you’re going to get hung up. On top of that, you’reStill sound weird? Topwater frogs are much more compact than traditional hard topwater baits, making them an excellent weapon around shallow riprap. Not only do they fool big bass, but they rarely get snagged on gnarly rock.
going to tear your line to pieces and probably break a few crankbaits in the process, too. A Strike King KVD Sexy Frog doesn’t have treble hooks, enabling me to throw right onto the rocks without any annoying hang-ups.”
- Differentiation—“Riprap banks get a lot of fishing pressure on most fisheries,” Grigsby said. “The fish get used to seeing crankbaits and other hard baits whiz by their faces each day and a topwater frog is something they never see. Anytime you can throw a curveball on active bass and show them something different, your chances of success really increase.”
Finding the most productive riprap
Every body of water is different, but the majority of available riprap is located around bridges. You may be able to find riprap that landowners use to support seawalls, but Grigsby starts his dissection the old fashioned way—with a simple lake map.
“If you want to find some good starting points for this technique, grab a map and look for anywhere a road crosses over the lake,” Grigsby said. “In the fall, it’s ideal to find riprap in creeks in order to capitalize on the shad migration. If you can find a road bed crossing the middle of a creek, you’ve got a good chance at having a lot of success.”
Grigsby targets corner pockets where nearby roads connect with the bank.
It’s almost impossible to point to a section of riprap and call your shots with a frog, but there are a few key characteristics Grigsby looks for when he locates a stretch of riprap.
- Corner pockets—“When a bridge intersects with the bank, you’ll usually find a small, shallow pocket—almost at a 90-degree angle,” Grigsby said. “These pockets are lights-out for frog fishing. The bass will basically herd shad onto these small flats and absolutely gorge on them, so target these areas and 50 yards to each side.”
- Bridge corners—“Bridge corners, where a bridge actually crosses the water, are excellent places to target,” Grigsby said. “Not only do they act as natural bottlenecks for shad during their migration, but they also offer great water flowDid you know? Bass are born predators, but they're also very strategic when it comes to feeding. They use all types of hard cover, riprap included, to pin their prey against. Instead of exerting energy to chase lone shad, they corral them against cover to save energy and feed more efficiently.
opportunities. Whether you’ve got power generation current or a simple wind current, it positions the shad and gives the bass a great ambush point.”
- Depth changes—“A lot of the riprap you’ll find will have consistent water depth for the most part,” Grigsby said. “The key is to find the one small stretch with deeper water—maybe where a culvert sits or where an older road bed used to be. If you’re going down a 5-foot deep stretch of riprap and all of the sudden it drops to 10 feet, you need to slow down and spend some time there.”
Casting angles make all the difference
Grigsby parallels the riprap to keep his bait in the strike zone longer.
When fishing riprap with topwater frogs, it’s important to utilize the correct casting angles. Similar to any other bass fishing technique, keeping your bait in the most productive strike zones is paramount.
“It’s essential to make parallel casts to riprap,” Grigsby said. “You’re probably not going to pull fish from 15 or 20 feet away to eat your frog, so keeping the frog within a few feet of the rocks will draw a lot more blowups. The large majority of your bites will come within 3 to 5 feet of the riprap.”
There is one exception to the rule, however. If you pay close attention, you’ll run across certain rocky banks that extend further into the water than others—in some cases the rock can protrude 15 feet from the bank. When you find these areas, it’s okay to back off a bit.
“If the riprap carries on into the water for several feet, big bass will cruise on top of the rocks and look for an easy meal,” Grigsby said. “In these situations, it’s okay to get further away from the bank and target the submerged rock. You’d be surprised by the vicious strikes it will get you!”
Grigsby’s proximity to the rocks also changes depending upon water clarity. He uses a simple rule to help him stay in the strike zone longer.
- Stained water—“In my experience, this technique is more effective with lightly stained water,” Grigsby said. “I like to be able to see 1 to 3 feet. In stained water, the bass will be right on the edge of the rip rap, so I like to get my Sexy Frog as close as I can to the rocks.”
- Clear water—“You can still get some quality bites in clear water, but I tend to keep my frog away from the rocks a little more,” Grigsby said. “Clear water bass will roam around and hunt more, so it’s a good idea to keep your frog about 3 feet away from the rocks.”
While many topwater techniques are highly effective in overcast or lowlight conditions, frog fishing around riprap actually calls for the polar opposite. Grigsby looks for high, bright skies instead.
“Overcast days are okay for this, but clouds will hurt the shad activity,” Grigsby said. “They’re not too big on the idea of coming to the surface and getting frisky when it’s cooler and cloudy. Sunny days are outstanding, however. When the sun is high in the fall, the bait will be higher in the water column, which is essential to this technique.”
Windblown riprap is always a hot-ticket item for crankbait fishing in the fall, but it’s not ideal for frog fishing. A small breeze is totally acceptable, but high winds can really hurt your chances.
“Frogs are a pretty stealthy topwater bait, so it’s hard for a bass to get a solid bead on it with a lot of wind,” Grigsby said. “For that reason, I really like slick, calm days for frogging riprap. On windy days, you’re better off with a Strike King KVD Sexy Dawg because it creates a lot more commotion. “
Grigsby’s retrieve cadence certainly changes depending upon the weather conditions, but here’s the catch—it can change daily. As a result, he stresses the importance of constant experimentation.
“I know it’s cliché, but you’ve got to let the fish tell you what they want,” Grigsby said. “I generally start with a basic side-to-side walking action while incorporating periodic pauses into my retrieve. Early in the morning, they’ll usually eat it when worked quickly, but later in the day you may have to pause your cadence a lot more to get the big bites.”
What to look for in a topwater frog
His frog arsenal is extensive, but Grigsby keeps it simple when targeting riprap.
Above all else, Grigsby suggests using a frog that “walks” across the water’s surface. Because fall bass focus so heavily on shad, it’s important for your lure to mimic a wounded or dying shad.
“The Strike King KVD Sexy Frog is honestly the best walking frog I’ve seen,” Grigsby said. “It also has a built-in rattle, so it makes a faint clicking sound which drives the bass insane. I keep my color selection extremely simple, too. More often
than not, you’ll see me using a Tiger Black color and a Sexy Frog color. The black frog silhouettes very well in darker conditions and the shad-colored frog is a near-perfect imitation of a fall shad.”
The next time you hit the water, throw conventional wisdom out the window and try something different. Instead of chunking and winding hard reaction baits on riprap, break out a topwater frog. You’ll catch a lot of bass and have a bunch of fun in the process.
What other off-the-wall places do you like to throw topwater frogs? Let us know in the comments below!